The flat emery cloth wheel should be kept balanced before use

2023 02/10

In the industrial production of flat emery cloth wheels, it plays an important role and is widely used in the processing of industrial production products, mainly for polishing and polishing. However, we need to be careful when using it. It must be balanced before it can be used. Otherwise, there will be many problems. Let's take a look at flat grinding wheel manufacturers.

The flat abrasive cloth wheel is clamped on the flange at high speed, and the unbalanced centrifugal force will cause the main shaft to vibrate, seriously affecting the processing quality, and may even cause the grinding wheel to break. The new grinding wheel with large diameter (usually greater than 250mm) needs to be roughed and finely balanced before use: after rough balancing, install it on the grinding machine, surround the circumference of the grinding wheel with a diamond pen, flatten both ends, and then remove it from the grinding machine Lower the grinding wheel. Fine-tune by rough balancing.

The quality of the wheel balance should be determined by detecting the amount of vibration to determine if balancing is required. The flat emery cloth wheel is suitable for grinding, derusting and polishing of various irregular profiles and ordinary planes. It is widely used in various industries and has a good effect on polishing or drilling in the metal industry. We should check its quality before use to ensure that there will be no damage to quality problems during use.

Our company is a factory which specialized in polishing consumables and auxiliary materials:liquid polishing paste,solid Polishing Wax, polishing Sisal Wheel,cotton Cloth wheel, spray gun, pressure tank ect.
For more information, please contact us:
Tel :+86-0750-3336979
Fax :+86-0750-3336979
Mobile Phone :+8613528363086
Email :infocici@goodpolishing68.com

Previous:Introduction about the product characteristics of dry sanding paper

Next:Do you know about the different classifications and application fields of disc sand?