Types of sisal wheels
1. Hemp wheel: The main material is made of hemp cloth, strong toughness cotton thread, and oblique cut cotton cloth, which are sewn by a high beam sewing machine. The hemp cloth is sharp, and the cotton cloth is sticky to wax. Under the dual action, it shows special grinding force.
2. Oil hemp wheel: Made from high-quality domestic hemp as raw material, pressed by a sisal cart, and soaked in special oil treatment before air drying, it is wear-resistant, temperature resistant, and has strong cutting force.
Production process
The production process of sisal wheels has been used by manufacturers for decades to cut hemp cloth into the required size using traditional techniques, and is made by hand or machine layering sewing. There may be slight differences in standards or quality between individuals.
The use of hemp wheelsMa Lun needs to be used in combination with polishing wax to better exert its polishing effect and achieve the desired polishing effect. polishing Solid wax is commonly used. Polishing workers need to choose different polishing waxes to match according to the requirements of different workpieces, and different types of polishing waxes will also use different colors for easy differentiation.
Polishing workers also need to add polishing wax to the hemp wheel from time to time during the polishing process to avoid insufficient polishing wax affecting the polishing effect. At the same time, this also increases the workload of workers and reduces work efficiency. And the combination of solid polishing wax and sisal wheel due to insufficient adhesion can generate a large amount of dust during the waxing process, which can also pose serious health risks to the respiratory system of workers.
In order to better solve the above-mentioned problems, many factories now use polishing liquid wax. The advantage of this technology is that it combines evenly and tightly with the polishing wheel, reduces waste, and can effectively cool the polishing wheel. However, the use of liquid polishing wax requires specialized equipment to spray onto the surface of the polishing wheel during use. It requires the use of a pressure bucket paired with a high-pressure spray gun, which uses timed and quantitative high-pressure spraying, automation, and no manual labor.
